Support and Contact Center

FinePix S5 Pro Digital Camera Specifications

FinePix S5 Pro Digital Camera Specifications*

Type of camera Interchangeable-lens SLR-type digital camera
Number of Effective Pixels(*1) 12.34 million (S-pixel: 6.17million, R- pixel: 6.17million) pixels
CCD sensor

23.0mmx 15.5mm Super CCD SR Pro

Number of recorded pixels L: 4,256x2,848 / M:3,024x2,016 / S:2,304x1,536 pixels
Storage media Compact Flash™ (CF) Card (Type I/II) and Microdrive™
File format´ Image quality mode

Exif-JPEG (Exif2.21(*2) compatible)´ FINE / NORMAL [Design rule for Camera File System 2.0 compliant / DPOF- compatible]/ CCD-RAW(14bit) / CCD-RAW + Exif- JPEG

Lens mount Nikon F mount (with AF coupling and AF contacts)
Usable lenses
  • Type DX AF Nikkor: All functions supported
  • Type G or D AF Nikkor (IX Nikkor lenses can not be used): All functions supported
  • Micro Nikkor 85 mm f/2.8D:All functions supported except auto-focus and some exposure modes
  • Other AF Nikkor(excluding lenses for F3AF): All functions supported except 3D color matrix metering II and 3D multi-sensor balanced fill-flash for digital SLR
  • AI-P Nikkor: All functions supported except 3D color matrix metering II,3D multi-sensor balanced fill-flash for digital SLR, and auto-focus
  • Non-CPU: Can be used in exposure modes A and M; electronic range finder can be used if maximum aperture is f/5.6 or faster; color matrix metering, multi-sensor balanced fill-flash for digital SLR, and aperture value display supported if user provides lens data
Lens servo Single Servo AF(S) / Continuous Servo AF(C) / Manual focus(M)
Picture angle Approx. 1.5x focal length in 35mm format equivalent


AUTO, ISO100/125/160/200/250/320/400/500/640/800/1000/125 0/1600/2000/2500 /3200 (Standard Output Sensitivity)

Auto focus

TTL phase detection. AF assist illuminator.
Focus areas Normal: 11 areas; single area or group can be selected; Wide: focus area can be selected from 7 areas
AF Area mode

1) Single Area AF 2) Dynamic AF 3) Group Dynamic AF 4) Dynamic AF with closest subject priority

Shutter speed

30 sec. to 1/8000 sec. Bulb.

Continuous Shooting

C H: Up to max. 3 frames/sec. ([D-RANGE] set to [100%(STD)]) / Up to 1.5 frames/sec. ([D-RANGE] set to WIDE (other than [100%(STD)]))

C L: Up to max. 2 frames/sec. ([D- RANGE] set to [100%(STD)])/ Up to 1.5 frames/sec. ([D-RANGE] set to WIDE (other than [100%(STD)])), and 1 frames/sec.

Auto bracketing

Number of shots 2-9 compensated EV value 1/3 1/2 2/3 1 EV step.

Exposure metering system

Three-mode through-the-lens (TTL) exposure metering. 3D Color Matrix Metering II (metering performed by 1,005-segment RGB sensor) / Center- weighted / Spot

Exposure compensation

- 5.0EV to +5.0EV Step can be selected from 1/3, 1/2, 1EV step.

Exposure modes

Programmed Auto with flexible program [P], Shutter-Priority Auto [S], Aperture- Priority Auto [A], and Manual [M]

White balance

Automatic / Incandescent light / Fluorescent lamp (1-5) / Fine / Flash / Shade / Color temperature / Preset Custom(1-5) Fine tuning can be set.

Film Simulation

(STANDARD) / F1 / F1a / F1b / F1c / F2

Color Space

sRGB / Adobe RGB (1998)

Dynamic Range

AUTO / 100%(STD) / 130% / 170% / 230%(W1) / 300% / 400%(W2)


Fixed-eyelevel pentaprism, built-in diopter adjustment, Frame coverage: Approx. 95%, Magnification: Approx. x 0.94

LCD back monitor

2.5-inch approx. 230,000 pixels low temperature polysilicon TFT color LCD (approx. 100% frame coverage for playback)

Built-in flash

Manual pop-up with button release. Guide No. 12 (ISO 100, m).
i-TTL balanced fill-flash or standard i-TTL flash.
Flash synchronization up to 1/250 sec.

Accessory shoe

Standard ISO-type with hot-shoe contact (Safety lock provided)

Flash control

1) TTL: TTL flash control by 1,005-pixel RGB sensor
Built-in flash: i-TTL balanced fill- flash or standard i-TTL flash (spot metering or mode dial set to [M])
SB-800, 600 or SB-R200: i-TTL balanced fill-flash for digital SLR and standard i-TTL flash for digital SLR

2) Auto aperture: Available with SB- 800 with CPU lens

3) Non-TTL Auto: Available with flash such as SB-800, SB-80DX, SB-28DX, SB-28, SB-27, and SB-22s

4)Range-priority manual; available with SB-800

Remote release

Electronic shutter release

Video output

NTSC / PAL selectable(*3)

Digital interface

USB 2.0 (High-Speed)

Sync contact

X-contact only: flash synchronization up to 1/250 sec.

Synchronization terminal

Equipped with ISO 519 synchronization terminal as standard, lock screw provided

DC input

AC Power Adapter AC-135VN (Optional)

Power source

Rechargeable Li-ion battery (included) or AC Power Adapter AC-135VN (Optional)


5.8in. (W) x 4.4in. (H) x 2.9in. (D) (not including accessories and attachments)

Camera mass (weight)

29.3 oz. (not including accessories, battery and memory card)

Guide to the number of available frames for battery operation

Approx. 400 frames(*4)


Accessories included

Rechargeable Li-ion battery NP-150, Battery charger BC-150, Shoulder strap, Camera body cap, Eyepiece cap, LCD cover, USB cable(mini- B), Video cable, Accessory shoe cover, Synchronizing terminal cap, Remote release socket cap, CD-ROM [ image browser with CCD-RAW converting function ]

Optional accessories

Rechargeable Battery NP-150, Battery Charger BC- 150, AC Power Adapter AC-135VN, Hyper-Utility Software HS-V3, Hyper-Utility Software HS-V3UP(*5)

* With Fujifilm's commitment to constant improvement, the company reserves the right to alter specifications without prior notice.

(*1) The number of pixels on the image sensor which receive input light through the optical lens, and effectively reflected in the final output data of the still image.
(*2) Exif2.21 is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
(*3) When connecting the Video cable (included) to TV, the camera's screen is turned off.
(*4) "CIPA DC-002-2003 Standard Procedure for Measuring Digital Still Camera Battery Consumption" (extract); Using included rechargeable Li-ion battery NP-150, AF50mm F1.4D lens, Compact Flash™ (CF) Card. Pictures shall be taken at a temperature of 23°C(73.4F) every 30 seconds, the flash used at full power every second shot and the camera turned off and then on again once every 10 shots.
(*5) HS-V3UP is an upgrade package for HS-S2 and HS-V2.