Onset X1-LT

Imagine being able to upgrade your press to increase throughput as your business grows.Imagine Onset quality at a mid range price. The Onset X1-LT flatbed UV printer provides the amazing, market-leading print quality expected from the Onset series with production speeds that help your business grow. As the need for throughput increases, an easy upgrade path allows the LT to build to a full Onset X1. At initial install, The X1-LT is capable of producing sellable output of 40 5′ x 10′ full size beds per hour with manual handling.

Onset X1-LT is capable of producing sellable output at speeds in excess of 2,152 ft2/hr equating to 40 5’ x 10’ beds per hour by utilizing a small droplet size (14 picoliters) jetted through 42,000 nozzles to produce crisp images, fine lines, sharp text and smooth tonal graduations. It offers many of the features associated with the Onset X Series, including a wide color gamut, optional white, variable satin to gloss finish, advanced job management and automation. There’s no gloss-matte banding commonly associated with conventional reciprocating head technology, especially in high saturation areas. In addition, the Onset X1-LT produces superb POP-quality display graphics economically up to 1.8” (46mm) thick. After the Level 1 Upgrade, the X1-LT is capable of producing 58 5’ x 10’ beds per hour with manual handling. That’s over 4,300 square feet per hour. The Level 1 Upgrade includes the addition of a second UV lamp, the associated electronics and additional print modes. Adding a second UV lamp allows for bidirectional printing, which significantly increases printing speed.

Features

  • High Quality, high speed output of 40 beds an hour
  • Output increases to 58 beds an hour after the Level 1 Upgrade
  • iNozzle auto nozzle mapping technology
  • 25 zoned vacuum print bed
  • Variable gloss levels from satin to gloss
  • Automated print head sensor protection
  • Inca Vision remote diagnostics software
  • Reporter Pro provides costing data
  • Print Run Controller for management of versions and variable print runs
Printing Systems
Process
CMYKCMYK+W
CMYK+LcLm
Operation conditions
Print Area
Rigid and flexible sheets up to 126.8” x 63” (3.22m x 1.6m) (edge to edge printing)
Print Finish
Variable, Satin to Gloss
Max. Substrate Thickness
Manual: 1.8” (46mm)
With Automation: 0.71” (18mm)
RIP
Caldera GrandRIP+
ColorGATE Production Server (Fujifilm edition)
Fujifilm Uvijet UV Inks
OW, OL, OB or OZ series UV curable inks
Space Required
Manual – 49.3’ X 19.5’ (15.0 m x 5.9 m) (including space forexclusion zones, door opening and access) + Chiller
Space Required after Upgrade 2
3/4 Automation:
Long Edge – 47.6’ x 34.8’ (14.5 m x 10.6 m) + Materials Handling + Chiller
Short Edge – 55.8’ x 23.3’ (17 m x 7.1 m) + Materials Handling + Chiller
Hostert Automation (includes 10’ width for fork truck access):
Long Edge – 47.6’ x 37.7’ (14.5 m x 11.5 m) + Materials Handling + Chiller
Short Edge – 55.8’ x 37.7’ (17 m x 11.5 m) + Materials Handling + Chiller
Power Supply
Printer
Three-phase Rated voltage 380-480V ac, 100A, 50/60Hz, Protective Earth / Ground
Chiller
380-480V ac, Three-phase, 50/60Hz, supplied via 30 amp circuit breaker
Factory Air Requirement
Printer
90 PSI (6 bar)
Network
1000 Base-T

Note

  • *Product specifications are subject to change without notice.